Philips AE5000, User Manual

Page: 4 / 43

English Controls/Power Supply
Congratulations on your purchase
and welcome to Philips!
To fully benifit from the support that
Philips offers, register your product at
www.philips.com/welcome
.
Supplied Accessory
– AC power cord
Top & front panels (see
1
)
1
POWER – switches on/off the set
2
PRESET
– stores and recalls 5 DAB/FM stations
SELECT
– in DAB mode, selects a selection
– in DAB/FM mode, select a preset station
/–
1
/
2
/–
has not any auto search sta-
tion function.
– in DAB mode, selects DAB stations, or
selects menu options
– in FM mode, fine tunes a station
SOURCE
– selects DAB (on Band 3 ), or FM mode
3
MENU
– in DAB mode, enables access to advance
setup options
– activates resetting mode (press and hold for
2 seconds)
4
DISPLAY
– in DAB mode, selects station information in
seven types
– switches DIM on or off (press and hold for 2
seconds)
5
SCAN
DAB:
– press briefly SCAN to perform a search of
wider range (full scan) for DAB stations
FM: – tunes to a station
6
/– – adjusts volume level
7
LCD display
– displays DAB and FM radio information
Back panel (see
1
)
8
Telescopic antenna
– improves DAB and FM reception
9 p
– 3.5 mm stereo headphone socket
Helpful hints: The speakers will be muted
when headphones are connected to the set.
0
AC MAINS
!
Battery door – opens to insert 6 x 1.5V
R-14
/
UM-2
/
C-cells
CAUTION
High voltage! Do not open.You
run the risk of getting an electric
shock.The machine does not con-
tain any user-serviceable parts.
Modification of the product could
result in hazardous radiation of
EMC or other unsafe operation.
This set complies with the radio
interference requirements of the
European Union.
Power Supply
Whenever convenient, use the mains supply
cord if you want to conserve battery life.
Make sure you remove the plug from the set
and wall outlet before inserting batteries.
Batteries (not included)
1 Open the battery door and insert 6 batteries,
type
R-14
,
UM-2
or
C-cells
, (preferably
alkaline) with the correct polarity as indicated
by the "
+ " and " – " symbols inside the com-
partment (See
1
).
2 Replace the battery door, making sure the bat-
teries are firmly and correctly in place.The set is
now ready to operate.
• Incorrect use of batteries can cause electrolyte
leakage and will corrode the compartment or
cause the batteries to burst
:
AE5000_05_CCR_Eng/Nor/Dan 2007.9.19 16:28 Page 4