Changing the DAB station
information
In DAB broadcasting, on the display, the first
line shows a station name, and the second
line shows the service information for the
current station.You are offered with 7 types
of information.
•
Press
DISPLAY
repeatedly to cycle through
the display information in the sequency as fol-
low (See
7
, take "BBC Radio 5 Live" as an
example of a station name):
1
:
Dynamic Label Segment (DLS)
:This
is scrolling text information supplied by the
DAB station, such as music titles or details of
the programme.
2
:
Program Type (PTY)
:This is a descrip-
tion of the type of programme, provided by
the DAB station and the broadcaster.
3
:
Multiplex Name
:This will show the
multiplex that is broadcasting the programme
you are listening to.
4
:
Time and Date
:This displays the time
and date, provided by the broadcaster.
5
:
Channel and Frequency
:This displays
the channel number and the transmission fre-
quency.
6
:
Signal information
:This shows the digi-
tal bit-rate and the signal mode.
7
:
Signal Error Rate
: If the transmisstion
signal contains errors, the system can apply
correction.The amount of signal correction
can be displayed as a numerical value
between 0 and 99. As the value increases, the
signal will be degraded.To improve reception,
try adjusting the position of the antenna.
Using the MENU control
The menu control lets you access the DAB
radio setup options.
1
In DAB mode, press
MENU
to enter the
menu options.
➜
The first setup option "Manual tune" is
displayed.
2
Press
1
/
2
to scroll up and down the menu
options:
Manual tune
- >
Autoscan local
- >
Autoscan full
- >
DRC value
->
Sw version
3
To select an option, press
SELECT
.
4
Repeat
steps 2-3
if sub-option is available
under one option.
Manual tune
By using this feature, it is possible to manually
tune to a specific channel/frequency. In addi-
tion to antenna orienting for better radio
reception, the optimum reception can also be
obtained by using this feature.
1
In DAB mode, press
MENU
to display
"
Manual tune
" option.
2
Press
SELECT
to make a selection.
➜
Display shows a channel and its frequen-
cy.
3
Press
1
/
2
repeatedly until desired
channel/frequency appears.
4
Press
SELECT
to confirm the selection.
➜
The second line of the display shows the
selected channel and its frequency. The
first line of the display shows a rectangle.
The position of the rectangle indicates
the degree of signal strength (The further
towards the right, the greater the signal
strength
.
See
4
).
5
Adjust the position of the antenna to obtain
the optimum signal strength.
6
Press
SELECT
to return to normal display.
➜
You may press
DISPLAY
to change the
service information on the display.
DAB Radio
AE5000_05_CCR_Eng/Nor/Dan 2007.9.19 16:28 Page 8
Summary of Contents for AE5000
Page 1: ...AE5000 Portable DAB radio User Manual ...
Page 2: ...1 1 2 3 4 5 6 7 8 9 0 ...
Page 17: ...1 1 2 3 4 5 6 7 8 9 0 ...
Page 31: ...1 1 2 3 4 5 6 7 8 9 0 ...
