18
EN
6 Update
firmware
Note
^ # &?`\
%
1
On your PC/Mac, go to www.philips.com/
support.
2
{ %
$%
3
$ # $
Update from the
Warning
Always connect your AD7000W to AC power for
|$ # "V9
www.philips.com/support
XXXX
XXXX. zip
Note
To use an Internet browser other than Apple Safari
on your PC/Mac, remember to go to the Wi-Fi router
}&
your AD7000W. See the user manual of your Wi-Fi
}& $
connected to the Wi-Fi router.
1
Power on AD7000W (see 'Turn
AD7000W on' on page 6).
»
It takes about 35 seconds for the unit
to boot up. During boot-up, the
WI-FI
SETUP
indicator on the back of the
unit blinks green quickly.
»
After boot-up, you can hear a beep
and the
WI-FI SETUP
indicator
turns to green steadily. AD7000W is
9;<
network automatically.
2
Make sure that AD7000W and your PC/
Mac are connected to the same Wi-Fi
router.
3
Open Apple
Safari
on your PC/Mac, then
select 'Philips_Fidelio XXX' from the
Bonjour pull-down list.
Or open any other Internet browser
on your PC/Mac, then type in the IP
address of AD7000W (available on the
9;< ~
address bar.
»
+ "V9 %
page is displayed.
All manuals and user guides at all-guides.com
