10
EN
6
Open a Web browser on your PC and load the configura-
tion interface for each assigned IP address to configure the
WLAN adapters individually. Your user name and password
is required. Leave the USER NAME field empty and enter
‚administrator‘ in the PASSWORD field.
X
The configuration interface is displayed with the following
pages General, Network, Upload.
http://192.168.XXX.XXX
User name
Password
administrator
LOGIN
7
Make any additional configuration changes as you see fit.
Configuration, p. 12
Note
• The device is configured by default to obtain an IP address
from your DHCP server. If this default setting has been
changed, you must reset the device to its factory default set-
tings before starting.
Resetting to factory defaults, p. 19.
Tip
• It is good practice to make a note of the location and
network socket number of each WLAN adapter before
they are deployed. You can enter this information into
the comment field of the configuration interface, which
will make it easier to troubleshoot and maintain WLAN
adapters in your network.
Assigning a comment, p. 17.
Installation using the factory default IP address
If your network does not have a DHCP server, follow these steps
to install a new WLAN adapter:
1
Connect the WLAN adapter.
Connect the WLAN
adapter, p. 8.
2
Slide a Pocket Memo dictation recorder 9600 or 8000 series
into the docking slot of the docking station.
OFF
ON
3
When using a Pocket Memo dictation recorder 9600 series,
press and hold the
FUNCTION
and the
MENU
button on
the recorder simultaneously for 3 seconds.
When using a Pocket Memo dictation recorder 8000 series,
press and hold the
+
and the
–
button on the recorder simul-
taneously for 3 seconds.
Summary of Contents for ACC8160
Page 2: ......
Page 4: ...4 EN ...
