Philips 9000 series, Manual

Page: 25 / 166

Cleaning the trimmer attachment
Clean the trimmer attachment every time you have used it.
1
Switch on the appliance with the trimmer attachment attached.
2
Rinse the attachment under a warm tap (Fig. 56).
3 After cleaning, switch off the appliance.
4 Carefully shake off excess water and let the attachment dry.
Tip: For optimal performance, lubricate the teeth of the attachment
with a drop of sewing machine oil regularly.
Cleaning the beard styler attachment
Clean the beard styler attachment every time you have used it.
1 Pull the comb off the beard styler attachment.
Note: Grab the comb in the centre to pull it off the beard styler
attachment. Do not pull at the sides of the comb (Fig. 31).
2
Switch on the appliance.
3
Rinse the beard styler attachment and the comb separately under
a warm tap (Fig. 57).
4 After cleaning, switch off the appliance.
5 Carefully shake off excess water and let the beard styler
attachment and comb dry.
6 For optimal performance, lubricate the teeth of the attachment
with a drop of sewing machine oil regularly.
Cleaning the cleansing brush attachment
Clean the cleansing brush attachment every time you have used it.
1 Switch off the appliance.
2 Detach the brush head from the attachment base (Fig. 58).
3
Clean the parts thoroughly with warm water and soap.
4
Dry the cleansing brush attachment with a towel.
Storage
1 Store the appliance in the pouch supplied (Fig. 59).
Note: Make sure the appliance is dry before you store it in the
pouch.
21
English