2
1.4. Mounting on a Wall
To mount this display on a wall, a standard wall-mounting kit (commercially available) is required. It is recommended that you use a mounting interface that
complied with TUV-GS and /or UL1678 standard in North America.
Protective Sheet
VESA Grid
Table
1.
Spread a protective sheet on a flat surface, which is wrapped around the display when it was packed, beneath the screen surface to facilitate your
operation without scratching the screen.
2. Ensure you have all accessories necessary for all types of mounting (wall mount, ceiling mount, table stand, etc).
3. Follow the instructions that came with the base mounting kit. Failure to follow the correct mounting procedures could result in damage to the
equipment, or injury to the user or installer. The product warranty does not cover the damage caused by improper installation.
4. For the wall-mounting kit, use the M4 mounting screws (with a length 10 mm longer than the thickness of the mounting bracket) and tighten them
securely
5.
Weight of the unit without base = 5.2 kg. The equipment and its associated mounting facilities still remain secure during the test. Use only the UL
listed Wall Mount Bracket with a minimum weight/load of 5.2 kg.
6. Portrait orientation is not allowed.
1.4.1. VESA Grid
32BDL3010Q
100(H) x 100(V) mm
200(H) x 200(V) mm
Caution:
To prevent the display from falling:
• For wall or ceiling installation, we recommend that you install the display with metal brackets which are commercially available. For detailed instructions
about the installation, refer to the guide provided with the bracket.
•
To prevent the display from falling in case of earthquake or other natural
disaster, please consult the manufacturer of the bracket for the mounting location.
Ventilation Requirements for enclosure locating
Leave a space of 100 mm at the top, rear, right and left of the display for ventilation.
100 mm
100 mm
100 mm
100 mm
