Alternatively, you can enter special characters with the remote
control SMS/text keypad on the front of the remote control.
Qwerty and Azerty keyboard
The standard layout of the remote control keyboard is Qwerty.
Azerty keyboard
Depending on your region, the remote control keyboard can be
set to Azerty. The Azerty characters are shown at the top right
of the relevant keys.
To set the keyboard layout to Azerty, . . .
1
- Press
and select
Setup
and press
OK
.
2
- Select
TV settings
>
General settings
>
Remote control
keyboard
.
3
- Select
Azerty
or
Qwerty
.
6.3
Pointer
About pointer
Instead of navigating the screen with the arrow keys, you can use
the pointer. You can move the pointer — a blue arrow — over
the TV screen by moving the remote control. Just like you move
the cursor on a computer screen with a mouse.
You can use the pointer to navigate
Smart TV Apps*
and
Internet pages
on TV. Some Smart TV Apps might not support
the use of the pointer. When the pointer is not available, you
can use the arrow keys to navigate the screen.
You can adjust the speed of the pointer or if you never want to
use the pointer, you can switch it off.
* Gradually more Smart TV Apps will come available for use
with the pointer.
Using the pointer
When you open the Smart TV start page, the pointer is shown
in the middle of the screen.
Put your thumb on the
OK
key — do not press it — and move
the remote control from the wrist, no need to move your arm.
You can let go of the OK key and leave the pointer where it is.
You can move the remote control and pick up the pointer again
when you put your thumb on the OK key.
When you press an arrow key to navigate, the pointer
disappears. To recall the pointer, put your thumb on the OK key
and briefly jiggle the remote control.
When you hover the pointer over a link . . .
1 -
The pointer lights up.
2 -
Press
OK
to open the link.
When you hover the pointer over a text field . . .
Press
OK
to enter text.
Pointer speed
You can adjust the speed of the pointer, the speed at which the
pointer moves on screen.
To adjust the speed . . .
1 -
Press
and select
Setup
and press
OK
.
2 -
Select
TV settings
and press
OK
.
3 -
Select
General settings
>
Pointer and mouse speed
and
press
OK
.
4 -
Press the arrows
(up) or
(down) to increase or lower
the speed.
5 -
Press the arrow
(right) to test the speed you set.
6 -
Press the arrow
(left) to return to the setting. You can
adjust the setting again.
7 -
Press
OK
to store and close the setting.
8 -
Press
, repeatedly if necessary, to close the menu.
Switch off
If you want to navigate the Smart TV and Internet pages with
the arrow keys only, you can switch off the pointer.
To switch off the pointer . . .
1 -
Press
and select
Setup
and press
OK
.
2 -
Select
TV settings
and press
OK
.
3 -
Select
General settings
>
Remote control pointer
and
select
Off
.
4 -
Press
, repeatedly if necessary, to close the menu.
6.4
IR sensor for RF remote control
The remote control of the TV uses RF (radio frequency) to send
its commands to the TV. With RF, you do not need to point the
remote control at the TV.
26
