Philips 55PP9501/79, User Manual

Page: 28 / 52

26
Use of the menus
Sleep Timer
With the Sleep Timer function you can set a time period after which the TV
will turn itself off.
&
Select
Sleep Timer
with the cursor down.
é
Press the cursor right to set the time.
The counter runs from 0 up to 180 mins (in 5-min increments).When set to
0, the sleep timer is turned off.
One minute before the sleep timer expires, a message appears that the TV
will turn off in 60 seconds or you may cancel the sleep timer by pressing the
OK button.You can always turn off your TV earlier or change the set time.
On Timer
The On Timer function allows you to set a time to power your TV on
automatically at a certain time of day. It can be set to work once, or daily at
the same time.
The TV will turn on at the channel which was tuned when it was turned off.
Note: The On-Timer is available only after the GUIDE Plus+ has been installed.
&
Select
On Timer
with the cursor down.
é
Press the cursor right.
“
Select
Once
,
Daily
or
Off
to set the On Timer for one-time operation, daily
operation or Off.
‘
When you have selected
Once
or
Daily
, press the cursor right.
(
Enter the time with the digit buttons or with cursor up/down.
Also enter
AM
(A) or
PM
(P) with the cursor up/down. Invalid digits can not
be entered.
§
Press the OK button to return to the On Timer menu item.
If a valid hour has been entered, and the minutes are left blank, 00 is
automatically entered for the minutes spaces.
Note: If the On Timer has never been set, then the number-entry spaces are dash
marks.
If the On Timer has been set at any time previously, then the time last saved is
shown, even if the On Timer is set to Off.
Tilt Adjust
This function allows you, if necessary, to rotate the picture shown on the
screen, clockwise or counterclockwise.
&
Select
Tilt Adjust
with the cursor down.
é
Press the cursor left or right to adjust the rotation of the picture.
Reset AV Settings
This function allows you to reset most of the picture and sound settings to
their predefined factory states.
&
Select
Reset AV Settings
with the cursor down.
é
Press OK to erase settings and reset them to their default values.