3.2.3 IR board Control Unit
1. Unplug the connector from the SSB.
Caution:
be careful, as these are very fragile connectors!
2. Remove fixation screws [1]
、
[2] and connector in red box from the IR board control unit.
3. Remove the IR lens, IR board and key function
When defective, replace the whole unit.
3.2.5 Small Signal Board (SSB)
Caution:
it is mandatory to remount all different screws at their original position during re-assembly. Failure to do so may result in damaging the SSB.
1. Release the clips from the LVDS connector that connect with the SSB[1].
Caution:
be careful, as these are very fragile connectors!
2. Unplug all other connectors [2] .
3. Remove all the fixation screws from the SSB [3].
2
2
1
2
