background image

1

Once your PHILIPS purchase is registered, you’re eligible to receive all the privileges of owning a
PHILIPS product. So complete and return the Warranty Registration Card enclosed with your
purchase at once, and take advantage of these important benefits.

Return your Warranty Registration card today to ensure

you receive all the benefits you’re entitled to.

For Customer Use

Enter below the Serial No., which is
located on the rear of the cabinet. Retain
this information for future reference.

Model No. __________________________
Serial No. __________________________

Congratulations on your purchase, and
welcome to the “family!”

Dear PHILIPS product owner:

Thank you for your confidence in PHILIPS.You’ve selected one of
the best-built, best-backed products available today. And we’ll do
everything in our power to keep you happy with your 
purchase for many years to come.
As a member of the PHILIPS “family,” you’re entitled to 
protection by one of the most comprehensive warranties and
outstanding service networks in the industry.
What’s more, your purchase guarantees you’ll receive all the
information and special offers for which you qualify, plus easy
access to accessories from our convenient home shopping 
network.
And most importantly you can count on our uncompromising
commitment to your total satisfaction.
All of this is our way of saying welcome-and thanks for investing
in a PHILIPS product.

Sincerely,

Lawrence J. Blanford
President and Chief Executive Officer

P.S.

Remember, to get the most from your PHILIPS
product, you must return your Warranty
Registration Card within 10 days. So please mail
it to us right now!

Know these

safety 

symbols

This “bolt of lightning” indicates
uninsulated material within your unit
may cause an electrical shock. For the

safety of everyone in your household, please
do not remove product 
covering.

The “exclamation point” calls attention
to features for which you should read
the enclosed literature closely to

prevent operating and maintenance 
problems.

WARNING:

TO PREVENT FIRE OR

SHOCK HAZARD, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR  MOISTURE.

CAUTION:

To prevent electric shock,

match wide blade of plug to wide slot, fully
insert.

ATTENTION

: Pour éviter les choc

électriques, introduire la lame la plus large de
la fiche dans la borne correspondante de la
prise et pousser jusqu’au fond.

C A U T I O N

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

R

E

G

I S

T

R

A T

I O N

N

E

E

D

E

D

W

IT

H

IN

10

D

A

Y

S

Hurry!

Warranty
Verification

Registering your product within
10 days confirms your right to 
maximum protection under the
terms and conditions of your
PHILIPS warranty.

Owner
Confirmation

Your completed Warranty
Registration Card serves as
verification of ownership in the
event of product theft or loss.

Model
Registration

Returning your Warranty Registration
Card right away guarantees you’ll
receive all the information and special
offers which you qualify for as the
owner of your model.

Visit  our World Wide Web  Site  at  http://www.philips.com

t

s

126 1023.2 en us  29-08-2002  15:05  Pagina 1

Summary of Contents for 50FD995599


















Reviews: