Mechanical Instructions
4.
Figure 4-13 Small Signal Board
4.3.9
Direct Frame Insertion (DFI) Panel
Refer to next figures or details.
1.
Mark
LVDS connectors [1] feeding the display, preventing
mixing up during re-assembly.
Caution:
be careful, as these are very fragile connectors!
2.
Unplug the LVDS connectors [1] [2].
3.
Unplug the connector [3].
4.
Remove the screws [4].
5.
The DFI panel can now be taken out of the set.
Figure 4-14 DFI Panel
4.3.10 LCD Panel
Refer to next figures for details.
1.
Remove the stand.
2.
Unplug the LVDS connector(s) [1] and remove the
adhesive tape [1a].
Caution:
be careful, as this is a very fragile connector!
3.
Unplug the connectors [2].
4.
Remove the fixation screws [3] from rim.
5.
Take the rim from the set.
6.
Remove the fixation screws [4] and [5].
7.
Lift the subframe from the set.
8.
The LCD panel can now be lifted from the front cabinet.
I_17760_04
3
.ep
s
0
3
0
3
0
8
3
3
4
4
4
3
3
4
4
4
4
4
3
3
3
6
2
(
4x
)
5
1
1
OPTIONAL
2
(
3
x
)
I_17760_044.ep
s
0
3
0
3
0
8
1
1
2
4
4
4
4
4
4
3
