1 -
Clock
To display the clock.
2
-
Volume
To adjust the volume level.
3
-
Number keys
To select a diplay programme directly.
4
-
Subtitle
To switch subtitles on, off or Automatic.
5 -
Programme
To switch to the next or previous programme in
the programme list.
6 -
Mute
To mute the sound or to restore it.
7 - AD
Not available for this display.
8 -
color keys
Direct selection of options.
4.2
IR Sensor
The display can receive commands from a remote
control that uses IR (infrared) to send commands. If
you use such a remote control, always make sure you
point the remote control at the infrared sensor on the
front of the display.
Warning
Do not put any objects in front of IR sensor of the
display, it may block the IR signal.
4.3
Batteries
If the display does not react on a key press on the
remote control, the batteries might be empty.
To replace the batteries, open the battery
compartment on the keyboard side of the remote
control.
1 -
Slide the battery door in the direction shown by
the arrow.
2 -
Replace the old batteries with 2
type
AAA-R03-1.5V
batteries. Make sure the + and
the - ends of the batteries line up correctly.
3 -
Reposition the battery door and slide it back until
it clicks.
• Remove the batteries if you are not using the remote
control for a long time.
• Safely dispose of your old batteries according to the
end of use directions.
8
Bottom
