2
Before installing the display
• This product is packed in a carton, together with the standard accessories.
• Any other optional accessories will be packed separately.
• Move the display by at least two (2) adults.
• After opening the carton, ensure that the contents are complete and in good condition.
1.2. Package Contents
Please verify that you received the following items with your package content:
• LCD display
• Quick start guide
• Remote Control and AAA batteries
• Power cord
• RS232 cable
• RS232 daisy chain cable
• Logo
• Edge Alignment Kit-1: 2PCS
• Edge Alignment Kit-2: 1PCS
• Thumb Screw: 8PCS
* The supplied power cord varies depending on destination.
Quick start guide
Remote Control
and AAA Batteries
FORMAT
SOURCE
INFO
LIST
OPTIONS
ADJUST
VOL
NORMAL
ID
ID SET
ENTER
RS232 Daisy Chain Cable
RS232 Cable
Power Cord
Logo
Edge Alignment Kit-2 x 1
Edge Alignment Kit-1 x 2
Thumb Screw x 8
* Items may differ in different locations
* Display design and accessories may differ from the images shown..
NOTES:
• For all other regions, apply a power cord that conforms to the AC voltage of the power socket and has been approved by and complies with the
safety regulations of the particular country (Type H05W-F, 2G or 3G, 0.75 or 1 mm
2
should be used).
• Keep the packaging materials appropriately after unpacking the product.
1.3. Installation Notes
• Only use the power cable provided with this product. If an extension cord is required, please consult your service agent.
• The product should be installed on a flat surface, or the product may tip over. Leave a space between the rear of the product and the wall for proper
ventilation. Do not install the product in a kitchen, bathroom or a place exposed to moisture, failure to do so may shorten the life of the internal
parts.
• Do not install the product where it is 3000m and higher in altitude. Failure to do so may result in malfunctions.
