6 -
Select the country where you are now and
press
OK
.
7 -
Select
Cable (DVB-C)
.
8 -
Select
Start to search channels
, or
select
Settings for DVB-C settings
.
9 -
Press
BACK
to close the menu.
Network frequency mode
If you intend to use the fast
Quick scan
method
in
Frequency scan
to search for channels,
select
Automatic
. The TV will use 1 of the predefined
network frequencies (or HC - homing channel) as
used by most cable providers in your country.
If you received a specific network frequency value to
search for channels, select
Manual
.
Network frequency
With the
Network frequency mode
set to
Manual
,
you can enter the network frequency value received
from your cable provider here. To enter the value,
use the number keys.
Frequency scan
Select the method of searching for channels. You can
select the faster
Quick scan
method and use the
predefined settings used by most cable providers in
your country.
If this results in having no channels installed or if
some channels are missing, you can select the
extended
Full scan
method. This method will take
more time to search for and install channels.
Frequency step size
The TV searches for channels in steps of
8MHz
.
If this results in having no channels installed or if
some channels are missing, you can search in smaller
steps of
1MHz
. Using the 1MHz steps will take more
time to search for and install channels.
Digital channels
If you know your cable operator is not offering digital
channels, you can skip searching for digital channels.
Analogue channels
If you know your cable operator is not offering
analogue channels, you can skip searching for
analogue channels.
Free / Scrambled
If you have a subscription and a CAM - Conditional
Access Module for pay TV services, select
Free +
Scrambled
. If you did not subscribe to pay TV
channels or services, you can select
Free
Channels Only
.
For more information, in
Help
, press the colour
key
Keywords
and look up
CAM, conditional
access module
.
Reception quality
You can check the quality and signal strength of a
digital channel. If you have your own antenna, you
can reposition the antenna to try and improve the
reception.
To check the reception quality of a digital channel…
1 -
Tune to the channel.
2 -
Press
, select
Antenna/Cable installation
and
press OK. Enter your PIN code if necessary.
3 -
Select
Digital: Reception Test
and press
OK
.
The digital frequency is shown for this channel. If the
reception is poor, you can reposition your antenna.
To check the signal quality of this frequency again,
select
Search
and press
OK
.
To enter a specific digital frequency yourself, use the
remote control digit keys. Alternatively, select the
frequency, position the arrows on a number
with
and
and change the number
with
and
. To check the frequency,
select
Search
and press
OK
.
If you use DVB-C to receive channels, the
option
Symbol rate mode is
available. For Symbol
rate mode, select
Automatic
, unless your cable
provider gave you a specific symbol rate value. To
enter the symbol rate value, use the number keys.
Manual installation
Analogue TV channels can be manually installed,
channel by channel.
To install analogue channels manually…
1 -
Press
, select
Antenna/Cable installation
and
press
OK
. Enter your PIN code if necessary.
2 -
Select
Analogue: Manual Installation
and
66
