5
Switching On and
Off
5.1
On, Standby or Off
Before you switch on the TV, make sure you plugged
in the mains power in the
POWER
connector on the
back of the TV.
To put the TV in Standby when the indicator light is
off, press the small joystick key on the back of the TV.
The indicator will light up.
With the TV in Standby, press
on the remote
control to switch the TV on. Alternatively,
press
HOME
.
Switch back to Standby
To switch the TV to Standby, press
on the remote
control.
Switch Off
To switch the TV Off, press the joystick key. The
indicator light goes off.
The TV is still connected to the mains power but
consumes very little energy.
To switch off the TV completely, disconnect the
power plug.
When disconnecting the power plug, always pull the
power plug, never the cord. Ensure that you have full
access to the power plug, power cord and outlet
socket at all times.
5.2
Philips Logo Brightness
You can switch off or adjust the brightness of the
Philips logo on the front of the TV.
To adjust or switch off…
1 -
Press
, select
All Settings
and press
OK
.
2 -
Select
General Settings
and press
(right) to
enter the menu.
3 -
Select
Philips Logo Brightness
, and
press
(right) to enter the menu.
4 -
Select
Minimum
,
Medium
,
Maximum
,
or
Off
to switch off the lighting of the logo, then
press
OK
.
5 -
Press
(left) repeatedly if necessary, to close
the menu.
5.3
Keys on TV
If you lost the remote control or its batteries are
empty, you can still do some basic TV operations.
To open the basic menu…
1 -
With the TV switched on, press the joystick key on
the back of the TV to bring up the basic menu.
2 -
Press left or right to select
Volume,
Channel or
Sources. Select
Demo, to start a
demo movie.
3 -
Press up or down to adjust the volume or tune to
the next or previous channel. Press up or down to go
through the list of sources, including the tuner
selection. Press the joystick key to start the demo
movie.
4 -
The menu will disappear automatically.
To switch the TV off, select
and press the joystick
key.
5.4
Sleep Timer
With the
Sleep Timer
, you can set the TV to switch to
Standby automatically after a preset time.
To set the Sleep Timer…
1 -
Press
, select
Sleep Timer
and press
OK
.
2 -
With the slider bar you can set the time to up to
180 minutes in increments of 5 minutes. If set to 0
minutes, the Sleep Timer is switched off. You can
always switch off your TV earlier or reset the time
during the countdown.
3 -
Press
BACK
to close the menu.
26
