Before Using Your VCR 5
Putting Batteries in the Remote Control
3
Replace the battery compartment lid.
Using the Remote Control
•
Do not put objects between the remote control and the VCR.
•
Point the remote control at the device you are operating.
•
Press the VCR button before pressing other VCR buttons; press
the TV button before pressing other TV buttons; press the
CBL/DBS button before pressing other Cable Box/DBS buttons.
Details are on pages 24-25 and 27-28.
• The remote control and its batteries
are supplied.
• Do not mix alkaline and manganese
batteries.
• Do not mix old and new batteries.
• A thin, plastic cover may protect the
front panel of your VCR. Before
using the VCR, lift a corner of the
plastic, then peel it off.
Helpful Hints
VCR Maintenance/Video Head Cleaning
•
Remove any light adhesive stick-on notes from the video cassette
before putting the cassette in the VCR. Removable labels can jam
the VCR.
•
Periodic maintenance is required to maintain your VCR’s
performance. Your VCR automatically cleans the video heads each
time you insert a tape. However, the heads may become dirty.
“USE CLEANING CASSETTE” may appear on the screen, or
“U:01” may appear on the VCR display panel. Details are on page 67.
Erase Protection
Video cassettes have record tabs to ensure that recordings are not
erased accidentally.
1
To prevent accidental erasure, break off the tab with a
screwdriver.
2
To record again, cover the hole with cellophane tape.
1
To remove the battery compartment lid, push in the tab,
then pull up the lid.
2
Place two AA batteries inside the battery compartment
with their + and – ends aligned as indicated.
1
2
1
2
3
