ONE TIME PROGRAM
PROGRAM
1
C/– – – –
START +/–
– – : – – AM
STOP +/–
– – : – – AM
REC SPEED
SLP
DATE +/–
– – /– – /– –
DAILY: 8 WEEKLY: 9
CONFIRM: OK
END: TIMER
Follow the steps below to program your VCR to record TV
programs while you’re away from home. The VCR will turn itself on,
record, and turn itself off automatically.
Before you begin, make sure:
•
Channels are programmed. Details are on pages 12-13.
•
The clock is set. Details are on pages 14-18. If the clock is not set,
CLOCK MUST BE SET appears on the screen, followed by the
menu.
•
There is a tape in the VCR. Make sure the tape’s record tab is
intact and the tape is long enough to record the program(s).
•
The VCR is in VCR position. The VCR light will appear on the
display panel when the VCR is in VCR position. If the VCR light
does not appear, press the VCR/TV button once.
•
When you use a Cable Box/DBS, timer recordings are
programmed differently. Read pages 8-9 before proceeding.
Complete each step within 60 seconds of the previous step.
1
Press the VCR button, then press the TIMER button.
2
Press the PLAY
8
or STOP
9
button to select QUICK
PROGRAMMING, then press the OK/STATUS button.
3
Press the CH(annel)
8
/
9
button to enter the channel you
want to record.
•
If you are using a standard antenna/cable to VCR to TV hookup (as
shown on pages 6-7), enter the channel of the TV program you
want to record.
•
If you are using a Cable Box/DBS and are not using the Controller,
enter the Cable Box/DBS output channel (03 or 04). Set the Cable
Box/DBS to the channel you want to record. Leave the Cable
Box/DBS on for a timer recording.
•
If you are using the Controller, enter the channel number that you
want to record. The Controller will select the channel at the Cable
Box/DBS.
→
VCR PLUS+
QUICK PROGRAMMING
PROGRAM REVIEW
SELECT:
,9
CONFIRM: OK
END: TIMER
ONE TIME PROGRAM
PROGRAM
1
C/–
12 CABLE/TV
START +/–
– – : – – AM
STOP +/–
– – : – – AM
REC SPEED
SLP
DATE +/–
– – /– – /– –
DAILY: 8 WEEKLY: 9
CONFIRM: OK
END: TIMER
1
1
3
2
VCR
TV
VCR/TV
QUICK PROGRAMMING
POWER
STILL/SLOW
SMARTPICTURE
CH
VOL
OK/STATUS
TIMER
TURBO
REC END
MENU
-
+
CBL / DBS
1
2
3
4
5
6
7
8
9
START
STOP
DATE
DBS
DAILY
PLAY
REW
FF
STOP
WEEKLY
/OTR
REC
REC
-
+
-
+
SPEED
0
CLEAR
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
..
..
..
..
..
..
..
..
SEARCH
MUTE
TIMER
AUDIO/
SKIP
SEARCH
EJECT
ALT
-
-
40 Quick Programming
• If you are using a DBS with the
Controller, CABLE/TV or DBS appears
beside the channel number. You may
need to clarify whether the desired
channel is for Cable TV or Satellite TV
(DBS). If so, “CABLE/TV OR DBS: 0”
will appear at the bottom of the
screen. Press the Number 0 (DBS)
button to select either CABLE/TV or
DBS. Press the button repeatedly to
switch between the CABLE/TV and
DBS settings.
CABLE/TV is to record a cable TV
program received on the VCR or
through
a Cable Box; DBS is to record a
satellite program received through a
DBS.
Helpful Hint
ONE TIME PROGRAM
PROGRAM
1
C/–
125 DBS
START +/–
– – : – – AM
STOP +/–
– – : – – AM
REC SPEED
SLP
DATE +/–
– – /– – /– –
CABLE/TV OR DBS: 0
CONFIRM: OK
END: TIMER
