Switch channels
=
Press
BACK A/CH
on the remote
control to return to the previously
viewed channel.
=
Press
CH +/-
on the remote control or
P/CH +/-
on the side of the TV.
=
Press
OK
to use the channel matrix.
=
Enter a channel number using the
Numeric buttons
.
Note
=
When you use a favourite list, you can only
select those channels in the list.
Watch connected devices
Use the source button
1
Press
SOURCE
.
»
The source list appears.
2
Press or to select the connected
device.
3
Press
OK
to watch the connected device.
4 Use
your
TV
This section helps you perform basic TV
operations (see ‘Use more of your TV’ on page
10).
Switch your TV on/off or to
standby
To switch on
=
If the standby indicator is off, press
Power
switch
at the bottom of the TV.
=
If the standby indicator is red, press
(
Standby-On
) on the remote control.
To switch to standby
=
Press (
Standby-On
) on the remote
control.
»
The standby indicator switches to red.
To switch off
=
Press the
Power switch
at the bottom of
the TV.
»
The standby indicator switches off.
Tip
=
Though your TV consumes very little power
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.
EN
