32
Connect Peripheral Equipment
Other equipment can be connected to one of the remaining euroconnectors.
Other equipment
When no wireless RF surround sound is possible or when there is too much
interference you can still enjoy Dolby Pro Logic and Dolby Digital surround
sound by connecting the two rear loudspeakers to the TV with a stereo cinch
to stereo 3,5 mm jack cable. See Sound Setup, p. 10.
Wired rear loudspeakers
&
Insert the plug into the headphone socket
L
at the right side of the TV.
é
Press
¬
on the remote control to switch off the internal loudspeakers
of the TV.
The headphone impedance must be between 8 and 4000 Ohm.
The headphone socket has a 3.5 mm jack.
In the
SOUND
menu select
Headphone volume
to adjust the headphone
volume.
In case you want to listen via a wireless headphone, see Sound setup, p. 10.
L
Headphone
4934.3 gb /05 12-01-2000 14:37 Page 32
