17
Use of the menus
Surround settings menu
Select
Surround settings
in the Sound menu.
The contents of the Surround settings menu depends on the selected
Surround modes.
The graphical representation of the speakers is displayed on screen when
controls are being changed or when in test tone mode.
The drawing on screen is updated according to the chosen loudspeaker setup
and the selected surround mode. Speakers which are active are highlighted.
In 3D surround mode the graphical representation of the rear loudspeakers is
replaced by the symbol
®r
.The menu item
3D effect
appears and the level
of the 3D effect can be adjusted.
Note: if extra front speakers are connected and selected in the Sound Setup menu,
all internal TV speakers produce centre sound. See Connect Peripheral Equipment,
Extra loudspeakers/Amplifier, p. 33.
Adjustment of the volume level of the loudspeakers
The menu item
Test
enables you to have a reference of the internal and the
rear loudspeakers loudness.
&
Select
Test start
and press the
OK
key.
A steady noise tone is switched sequentially through the available
loudspeakers, for 2 seconds each.This enables you to have a reference of the
loudness of each loudspeaker and to adjust the level of each until they all
sound equally loud.
The loudspeakers activated light up in the screen graphic.
é
Select
Centre volume
,
Balance
,
Rear volume left
or
right
and alter the
selected adjustments.
“
Select
Test stop
and press the
OK
key when you have finished the
adjustment of the speaker levels.
Surround settings
Test start
Test stop
Centre volume
Balance
Rear volume left
Rear volume right
3D effect
Surround mode
Surround settings
Test start
Test stop
Centre volume
Balance
Rear volume left
Rear volume right
3D effect
Surround mode
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Stereo
3D surround
Pro Logic
Dolby Digital
(via a digital source)
MPEG Multichannel
(via a digital source)
Dolby 3 Stereo
Hall
4934.3 gb /05 12-01-2000 14:37 Page 17
