Philips 28PW9528, Manual

Page: 23 / 28

21
Press the
v
key on the remote control repeatedly to select
EXT1
,
EXT2
,
EXT3
or
SIDE
according
to where you connected your equipment at the back or the right side of your TV.
Remark : Most equipment (decoder, recorder) carries out the switching itself, when it is switched on.
To select connected equipment
Cinema Link surround receiver
Recorder or DVD with EasyLink
The recorder (VCR or DVD+RW) or DVD can
be operated with the remote control via the
Recorder
or
DVD
menu on screen.
& Press the
MENU
key on the remote control.
é
Select the Recorder or
DVD
menu with the
cursor up/down.
“
Press the cursor left/right, up/down to select
one of the recorder or DVD functions.
The key
®
for recording can be operated in the TV
mode.
If your EasyLink recorder has the system standby
function, when you press the
B
key for 3 seconds,
both TV and the recorder are switched to standby.
Ò p ‡ π † ®
Ï
Rwd Play Stop Play Ffw Rec Eject
Recorder
Ò p ‡ π †
Ï
Prev. Play Stop Play Next Eject
DVD
REAR
multimedia loudspeakers
&
Select
Surround speakers On
in the Setup
menu, see p. 8.
é
Connect the audio cables to the rear
loudspeakers and to the Dolby Surround
output
S
at the back of your TV.There is only
one output for both speakers.
“
Adjust the volume of the rear loudspeakers.
Use the Test tone function in the Speakers
menu, see p. 8.
Note: Once you have adjusted the volume of the
rear loudspeakers, do not change it while watching
TV as the whole configuration operates with the
volume adjustment of your TV.
Stereo amplifier and 2 extra front speakers
&
Select
Centre mode On
in the Setup, Speakers
menu, see p. 8.
é
Connect the audio cables to the audio input of
your amplifier and to
AUDIO L
and
R
at the
back of your TV.
“ Adjust the volume of the audio amplifier.
Use the Test tone function in the Setup,
Speakers menu, p. 8.
Note: Once you have adjusted the volume of the
external amplifier, do not change it while watching
TV as the whole configuration operates with the
volume adjustment of your TV.
See the separate supplied Cinema Link instruction manual.
Attention: the sound info on screen will not correspond with the actual sound reproduction.
Connect extra loudspeakers/amplifier
2194.1 gb 24-03-2003 13:53 Pagina 21