8
Your TV is equipped with integrated front left, right
and centre loudspeakers, capable of reproducing
Stereo, Dolby 3 stereo and 3D Surround modes.
For full Dolby Pro Logic Surround sound you
should use two amplified rear surround speakers
connected to the back of the TV.
See Extra loudspeakers/Amplifier, p. 21.
Depending on the output and Surround mode (see
Main menu,TV, Sound, Sound modes, p. 12)
selected, some menu items may be greyed out and
are not selectable.
Test tone controls
The menu item Test tone enables you to
balance the volume levels of the speakers.
&
Select
Test tone
and press the cursor right.
é
Once turned on, the Test Tone will circulate
through the left, centre, right speakers and both
rear surround speakers (if present).
“
Press the cursor up/down to select the desired
speaker for individual volume level adjustment.
‘
Press the cursor left/right to adjust the volume
level.
Centre Mode
To enhance the sound reproduction of your TV
you may connect two extra front loudspeakers
via an external amplifier. See Connect extra
loudspeakers/Amplifier, p. 21.
If no External Front Speakers are connected,
do not change the predefined factory settings
which is
Centre mode Off
. Only if an external
amplifier with Front Speakers is connected,
select
Centre mode On
.
In this setting, the centre channel in surround
mode is directed to all three internal TV
speakers (left, centre and right).
Surround Speakers
See Connect Peripheral Equipment, Connect
extra loudspeakers/amplifier, p. 21.
If no Surround Speakers are connected do not
change the predefined factory settings which is
Off
. If Surround Speakers are connected select
On
.
(Dolby Pro Logic and Hall are not available if
Off is selected.)
Auto Surround
Sometimes the broadcaster transmits special
signals for Surround Sound encoded
programmes.
The TV automatically switches to the best
surround sound mode when
Auto Surround
is
switched
On
.
However it is possible to overwrite this setting.
Speakers
TV Setup
The Setup menu contains items that control the
settings of the TV’s functions, features, services and
peripherals you may have connected.
The
Speakers
menu reflects the speaker-related
controls.
The
General
menu allows you to change settings
that will typically be accessed only occasionally.
The
Source
menu allows you to select a source.
The
Decoder
menu allows you to define one or
more programme numbers as decoder programme
numbers.
Speakers General Source Decoder
Test tone
Balance
Centre volume
(Surround volume)
(Centre mode)
Surround speakers
Auto surround
Setup
2194.1 gb 24-03-2003 13:53 Pagina 8
