background image

2

The television set has 4 or 5 keys which are
located on the front or the top of the set
depending on the model.
The VOLUME - + (- 

+) keys are used to

adjust sound levels.The PROGRAM - + (- 

P

+)

keys are used to select the required programmes.
To access the menus, simultaneously hold down
the 

- and 

+ keys (or MENU key).

The PROGRAM - + keys may then be used to
select an adjustment and the - 

+ keys to

make that adjustment.
To exit from the menus, hold down the 2 

-

and 

+ keys (or MENU key).

Note : when the 

Child Lock

function is activated,

these keys are unavailable (refer to 

Features

menu on page 7).

PROGRAM

VOLUME

MENU

-

-

+

+

&

Positioning the television set

Place your TV on a solid, stable surface, leaving
a space of at least 5 cm around the appliance.
To avoid accidents, do not put anything on the
set such as a cloth or cover, a container full of
liquid (vase) or a heat source (lamp).
The set must not be exposed to water.

é

Connections

• Insert the aerial plug into the 

:

socket at

the rear of the set.

If you are using an indoor aerial, reception may be
difficult in certain conditions.You can improve
reception by rotating the aerial. If the reception
remains poor, you will need to use an external aerial.

• Insert the mains plug into a wall socket 

(220-240 V / 50 Hz).

Remote control

Insert the two R6-type batteries (supplied)
making sure that they are the right way round.
Check that the mode selector is set to TV.
The batteries supplied with this appliance do
not contain mercury or nickel cadmium.
If you have access to a recycling facility, please
do not discard your used batteries (if in
doubt, consult your dealer).When the
batteries are replaced, use the same type.

Switching on

To switch on the set, press the on/off key.
A red indicator comes on and the screen
lights up. Go straight to the chapter Quick
installation on page 4.
If the television remains in standby mode,
press 

P

#

on the remote control.

The indicator will flash when you use the
remote control.

5 cm

5 cm

5 cm

Installing your television set

The keys on the TV set

Summary of Contents for 28PW8609/12

















Reviews: