Philips 26PFL3404/12, User Manual

Page: 29 / 34

27
Computer connection issues
The computer display on the TV is not stable:
Check that a supported resolution and
•
refresh rate is selected on the computer.
Set the TV picture format to unscaled.
•
Contact us
If you cannot resolve your problem, refer to
the FAQs for this TV at www.philips.com/
support.
If the problem remains unresolved, contact
Philips Consumer Care in your country as
listed in this User Manual.
Warning
Do not attempt to repair the TV yourself. This may
•
cause severe injury, irreparable damage to your TV
or void your warranty.
Note
Make a note of your TV model and serial number
•
before you contact Philips. These numbers are
printed on the back of the TV and on the packaging.
The picture position is incorrect:
Picture signals from some devices may •
not fi t the screen correctly. Check the
signal output of the device.
Sound issues
There is a picture but no sound from the TV:
Note
If no audio signal is detected, the TV automatically
•
switches the audio output off — this does not
indicate malfunction.
Check that all cables are properly
•
connected.
Check that the volume is not set to 0.
•
Check that the sound is not muted.
•
There is a picture but the sound quality is
poor:
Check that the sound settings are
•
correctly set.
There is a picture but sound comes from one
speaker only:
Verify that sound balance is set to the •
centre.
HDMI connection issues
There are problems with HDMI devices:
Note that HDCP support can delay the
•
time taken for a TV to display content
from a HDMI device.
If the TV does not recognise the HDMI
•
device and no picture is displayed, try
switching the source from one device to
another and back again.
If there are intermittent sound
•
disruptions, check that output settings
from the HDMI device are correct.
If a HDMI-to-DVI adaptor or HDMI to
•
DVI cable is used, check that an additional
audio cable is connected to
AUDIO L/R
or AUDIO IN (mini-jack only).
English
EN