84 Meridian 3
Ambient temperature:
0
C - 40
C
Power Range
FULL RANGE POWER SUPPLY 90 – 264 VAC
ELECTRICAL CHARACTERISTICS
Scaler should be capable of below items.
1) Scaler must support color engine for Image enhancement feature (SmartImage)
2) Scaler must have enough memory to support PerfecTune feature and Philips OSD
3) Scaler must support SmartContras,500K:1 DCR preferred
4) VGA signal Auto adjustment:
Monitor automatically adjusts and optimizes resolution and frequency based on input signal defined
by “Source” function. “NO VIDEO INPUT” message to be displayed on screen while no signal is
detected. Monitor will automatically optimize resolution and frequency whenever connected to
different signal source. When press the “Auto”, the screen also show a status bar. During
adjustment period, a status bar will show on screen from 0% to 100% to indicate the progress of
adjustment.
Auto auto adjustment : new timing & preset modes ( non- factory preset mode) should do auto
adjustment at first time detection and save the related
date into memory.
Resolution
≦
800x600 , do not do auto auto
adjustment.
Interface signals
1). D-Sub Analog
Input signal
: Video, Hsync., Vsync
Video
: 0.7 Vp-p, input impedance, 75 ohm @DC
Sync.
: Separate sync TTL level , input impedance 2.2k ohm
terminate
Hsync Positive/Negative
Vsync Positive/Negative
Composite sync TTL level, input impedance 2.2k ohm terminate
(Positive/Negative)
Sync on green video 0.3 Vp-p Negative (Video 0.7 Vp-p Positive)
2). DVI-D Digital
Input signal: Single TMDS link (Three channels: RX0-/+, RX1-/+, RX2-/+)
TMDS channel:
Carries audio, video and auxiliary data.
Signaling method: According to DVI 1.0 specification.
Single-link (Type A HDMI).
Video pixel rate: 25 MHz to 165 MHz (Type A)
Pixel encodings: RGB 4:4:4, YCbCr 4:2:2, YCbCr 4:4:4.
Audio sample rates: 32 kHz, 44.1 kHz, 48 kHz
Audio
channels:
2.
DDC
channel:
Allows source to interrogate capabilities of sink.
I²C signaling with 100 kHz clock.
E-EDID data structure according to EIA/CEA-861D and
VESA Enhanced EDID.
Content
protection:
According to High-Definition Content Protection (HDCP)
Specification 1.10.
HDMI video input should support timing defined in
CEA 861-D
specification with extended EDID blocks
Video Timing Support :
