Philips 244ESB/00 Service Manual Download Page 72

Page: 72 / 95

ʳ
ʳ

ʳʳʳʳʳ
ʳ
ʳ

ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳ˃ˁ˄

244E2 24” Wide FHD LCD Monitor

2010/05/16 PHILIPS 22 of 36

244E2 LCD

General Product Specification

ii. The OSD word color is white with transparent background.

iii. The demo profile will be “Video Playback” profile with “High” ODC setting.

C. Hot keys to trigger:

Press [Smart Image] 3 seconds or more to trigger the demo mode.

When demo mode is On, press 3 seconds or more to turn off the demo mode.

3.14.2

ˆˁ˄ˈ ˦̀˴̅̇ʳ̅˸̆̃̂́̆˸ʳʻ̂̉˸̅ʳ˷̅˼̉˸ʼʳˮʳˡ˂˔ʳ˼́ʳ˅ˇˇ˘˅˰ʳ

Response time < 2 msec GtG (Typical),

˩˼̆̈˴˿ʳ˶˻˴̅˴˶̇˸̅˼̆̇˼˶̆ʳ

ˇˁ˄

˧˸̆̇ʳ˶̂́˷˼̇˼̂́̆ʳ

Unless otherwise specified, this specification is defined under the following conditions.

(1) Input signal

: As defined in 3.3, 1920x1080

non-interlaced mode (1920X1080@60Hz 148.5MHz), signal

sources must have 75 ohm output impedance.

(2) Luminance setting : controls to be set to 250 nits with

full screen 100 % duty cycle white signal

(3) Warm up: more than 30 minutes after power on with signal supplied.

(4) Ambient light: 400 -- 600 lux.

(5) Ambient temperature: 20 ± 5

4.2

Brightness

Follow Panel specification.

4.3

Image size

Actual display size 473.76 mm x 296.1 mm

4.4

Brightness uniformity

Set contrast at 100% and turn the brightness to get average above 300 nits

at centre of the screen.

Summary of Contents for 244ESB/00
































































































Search results

Summary of Contents for 244ESB/00

Reviews:

Related manuals for 244ESB/00

Brands by name

Popular brands

Philips 244ESB/00, Service Manual

Search results

Summary of Contents for 244ESB/00

Reviews:

Related manuals for 244ESB/00

Brands by name

Popular brands