Philips 241P4QPYKEB/00, Service Manual

Page: 68 / 85

ġ
ġ
ġ
68 241P4QPYK LCD
ġ
General Product Specification
B. PerfectTune must be performed after Auto Color.
C. PerfectTune must be conducted through DVI or scaler embedded patterns.
D. Delta E < 2.5
3.17 PowerSensor
(option, refer to Quick specification table)
őŰŸŦųġŔŦůŴŰųġ
ŇŶůŤŵŪŰůŢŭġœŦŲŶŪųŦŮŦ
3.18 Smart Power (option)
To reduce the power by adjusting backlight, contrast and color.
Algorithm is provided by Supplier.
3.19
SmartResponse
To enhance the Response time when Gary to Gary.
When SmartResponse = 3, Response time = 6 mSec (typ.)
3.20
Pixel Orbiting
For the VA or IPS panels, it design to prevent Image Sticking.
ŎŦŵũŰťġŰŧġőŪŹŦŭġ
ŐųţŪŵŪůŨįűűŵ
SPEAKER
1) Input signal: 1000 mVrms
Loudspeaker (Impedance: 5.25 [F1] Ohm +/-15%): 1.5W+ 1.5 W (typical) , stereo for
RMS
2) earphone
Stereo, > 50mVrms for headphone of 32
:
. The loudspeakers are muted when
earphone is plugged in.
4 Visual characteristics
4.1 Test conditions
Unless otherwise specified, this specification is defined in following conditions.
(1) Input signal : As defined in 3.3, 1920 x 1080 non-interlaced mode (1920 x 1080 @60 Hz), signal
sources must have 75 ohm output impedance.
(2) Luminance setting : controls to be set to 300 nits with full screen 100 % duty cycle white signal