Philips 240PW9EB/69, Service Manual

Page: 73 / 92

ʳ˅ˇ˃ˣ˪ˌʳʳ˟˖˗ ʳʳ ˊˆʳ
General Product Specification
ʳ
ʳʳʳʳ
ʳʳʳʳ ʳʳʳʳ
ʳʳʳʳʳʳʳʳ
ʳ
5.2 Mechanical data files -
ˣ̅̂˘ʳ˹˼˿˸̆ʳ̅˸̄̈˼̅˸˷ ʳʳʳʳ
5.3 Location of Philips logo -
ˣ˸̅ʳˣ˻˼˿˼̃̆ʳ̀˴˾˸ˀ̈̃ʳ̆˻˸˸̇ʳ
5.4 Gap between panel and front bezel
ˏʳ˄ˁˇ̀̀ʳʻ˧̌̃ˁʼ ʳʳʳʳ
5.5 Location of Control icons -
ˣ˸̅ʳˣ˻˼˿˼̃̆ʳ˚̅˴̃˻˼˶ʳ̆˻˸˸̇ʳ
5.6 Color for resin/paint –
ˣ˸̅ʳˣ˻˼˿˼̃̆ʳ̀˴˾˸ˀ̈̃ʳ̆˻˸˸̇ʳ
5.7 Fire enclosure request-
˦˻˼˸˿˷˼́˺ʳ˖̂̉˸̅ʳ̆˻̂̈˿˷ʳ˹̈˿˹˼˿˿ʳ˼́̇˸̅́˴̇˼̂́˴˿ʳ̆̇˴́˷˴̅˷ ʳʳʳʳ ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳ ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳ ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳ ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳ
5.8 Resins
•
RoHS required
•
WEEE required.
•
Resin type/selection refer to Project Book Section 7.2 Plastic material.
5.9 If paint is used
•
RoHS required
•
WEEE require
•
If new painting type need to implement, refer to UN-D 1235.
ʳʳʳʳ
5.10 Plastic mold tooling
ʳʳʳʳ
•
Tooling to be designed to minimize cosmetic defects induced by molding process (sink,
blush, weld lines, gate marks, ejector marks, etc.). Refer to “TYV61-90007”.
•
Painting to cover up cosmetic defects due to molding is strongly discouraged.
ʳʳʳʳ
•
China RoHS mark requested.
ʳʳʳʳ
ʳʳʳʳ
5.11 Plastics flammability
•
All Plastics to be Flame Retardant UL 94-HB or Better.
•
Base / Pedestal to be Flame Retardant UL 94-HB.