Philips 240PW9EB/69, Service Manual

Page: 65 / 92

ʳ˅ˇ˃ˣ˪ˌʳʳ˟˖˗ ʳʳ ˉˈʳ
General Product Specification
ʳ
ʳʳʳʳ
ʳʳʳʳ ʳʳʳʳ
ʳʳʳʳʳʳʳʳ
ʳ
3.6 Power input connection
Power cord length : 1.8 M
Power cord type : 3 leads power cord with protective earth plug.
3.7 Power management
The monitor must comply with the Microsoft On Now specification, and
meet EPA requirements.
Mode HSYNC VSYNC Video Pwr-cons. Indication Rec. time
Power-On On On active 90W typical
(After 30 mins)
Blue LED --
Off Off Off blanked < 1 W
(<110V)
< 2 W
(<220V)
Blue LED
Blinking
3 sec on,
3sec off
< 3 s
DC Power Off N/A < 1 W LED Off
3.8 Analog Display identification
In accordance with VESA Display Channel Standard Ver.1.0 and DDC 2B
capability
3.9 DVI- D Display identification
In accordance with DVI requirement (DDWG digital Visual Interface
revision 1.0) use DDC-2B, DDC/CI, and EDID V1.3
3.10 USB Plug support
Connect the upstream port of the monitor to host PC’s USB port via USB
cable,
Then attach external device to the downstream port of the monitor.
Check if the device can work properly.
3.11 DDC /CI Support
In accordance with VESA DDC/CI and MCCS ver.2.0, the monitor should
be workable with Protrait Display Tune at least.