background image

1

Safety information and useful 

tips

1. 

  Two people are required to lift and carry a TV that weighs 

more than 55 lb (25 kg). Improper handling of the TV can 
cause serious injury.

2. 

  If you place the TV set on a solid surface. Ensure the 

surface is level and that it can withstand the weight of the 
TV.

3. 

  Installing the TV on the wall requires special skill that 

should only be performed by a quali

fi

 ed personnel.  You 

should not attempt to do the work yourself. Philips bears 
no responsibility for improper mounting or mounting that 
results in accident or injury. Make sure that the wall mount 
is being 

fi

 xed securely enough so that it meets safety 

standards.

4. 

  This TV is compatible with the VESA wall mounting 

standard. Please contact your local electronics supplier for 
a VESA compliant bracket to wall mount this TV. Before 
you mount your TV on a wall, ensure the wall is suitable to 
carry the weight of the TV.

5. 

  Do not insert the power plug in the wall socket before all 

connections are made.

6. 

  Do not touch any part of the TV, power lead, or aerial 

lead during lightning storms.

7. 

  Do not leave the TV in stand-by mode for an extended 

period of time. Instead, disconnect the TV from the mains.

8. 

  The TV set is always connected to the mains. 

Disconnection of the TV set can be done by:
•  unplugging the mains cord located at the back of TV 

set, or

•  unplugging the mains plug from the mains socket outlet.

 

B

 Pull the power lead by the plug - do not pull by the wire.

9. 

  Ensure the power cord is fully inserted into the TV mains 

socket and the wall socket.

10. 

If the TV is mounted on a swivel base or swivel arm, 
ensure no strain is placed on the power cord when the 
TV is swivelled. Strain on the power cord can loosen 
connections and cause arcing or 

fi

 re.

11. 

Verify that the mains supply voltage in your location 
corresponds to the voltage printed on the sticker at the 
rear of the TV.

12. 

The mains plug or appliance coupler is used as the 
disconnect device, the disconnect device shall remain 
readily operable.

13. 

An all-pole MAINS SWITCH is used as the disconnect 
device, the location on the apparatus and the function of 
the switch shall be described, and the switch shall remain 
readily operable.

1 Notice

Know these 
                   

safety 

symbols

This “bolt of lightning” indicates uninsulated material 
within your unit may cause an electrical shock. For 
the safety of everyone in your household, please do 
not remove product covering.

The “exclamation point” calls attention to features for 
which you should read the enclosed literature closely 
to prevent operating and maintenance problems.

WARNING

To reduce the risk of 

fi

 re or 

electric shock, this apparatus should not be exposed to rain or 
moisture and objects 

fi

 lled with liquids, such as vases, should 

not be placed on this apparatus.

CAUTION

:

 

To prevent electric shock, match wide blade 

of plug to wide slot, fully insert.

ATTENTION

:

 

Pour éviter les choc électriques, 

introduire la lame la plus large de la 

fi

 che dans la borne 

correspondante de la prise et pousser jusqu’au fond.

Healthcare TV models 

(22HFL5662H, 26HFL5662H, 32HFL5662H, 
42HFL5682H)

Class 1 Warning

WARNING

THIS TELEVISION IS CONSIDERED TO BE A DEVICE 
WITH CLASS 1 CONSTRUCTION AND IT SHALL BE 
CONNECTED TO A MAINS SOCKET OUTLET WITH A 
PROTECTIVE EARTHING CONNECTION.

Pendant control Instruction manual Marking

CAUTION
INSTALLER:

 THIS PRODUCT IS NOT PROVIDED 

WITH A PENDANT CONTROL; HOWEVER, IT IS 
EXPECTED THAT THIS INSTITUTION (OR HOSPITAL) 
WILL PROVIDE ONE FOR ATTACHMENT TO THE 
APPROPRIATE RECEPTACLE ON THE PRODUCT. 
AS PART OF THE INSTALLATION, EXAMINE THE 
PENDANT CONTROL TO DETERMINE WHETHER A 
MARKING SIMILAR TO THE ONE BELOW APPEARS 
ON IT: ‘CAUTION – RISK OF FIRE IF USED IN OXYGEN 
ENRICHED ATMOSPHERE – RETURN TO HOOK OR 
HOLDER AFTER USE.’ IF THE ABOVE NOTICE IS NOT 
PROVIDED ON THE PENDANT CONTROL, REMOVE 
THE LABEL PROVIDED WITH THESE INSTRUCTIONS 
AND ATTACH IT TO THE PENDANT CONTROL.

Summary of Contents for 22HFL5662H

































Reviews: