77
Meridian 3
3.3.3 Software control functions via OSD / control adjustable functions:
Item
1 OSD
DEFINITIONS
˛̈˷̆̂́ʳˋʳˢ˦˗ʳ
˗˸˹˼́˼̇˼̂́ʳˀʳ̉˄ˇˁ˷̂˶
Reset -
No: Exit
Yes: Auto adjustment for displaying
timing mode and recall factory preset
2 OSD
LANGUAGES
26'B6WULQJB0B
[OV[
8 LANGUAGES
3 OSD
TREE
ˠˆʳˢ˦˗ʳ˕̈̇̇̂́ʳ
˷˸˹˼́˼̇˼̂́ʳ˲ʳ˅˃˄˃˄˄˄ˉ
4 POWER
ON
LOGO
˄ˌ˅˃̋˄˃ˋ˃˲́˸̊ˁ
˵̀̃
Power On Logo: Power On
Æ
Show
up Philips logo 3 seconds
Æ
Change to input signal.
This picture is reference only. The
official drawing will send out by PM.
5 Audio
Selection
Stand-alone – On:
Isolate video and audio control input
Stand-alone – Off:
Integrate video and audio control
input
Mute – On: Turn off audio
Mute – Off: Turn on audio
3.4 Horizontal scanning
Sync polarity
: Positive or Negative
Scanning frequency
: 30 - 83 KHz
3.5 Vertical scanning
Sync polarity
: Positive or Negative
Scanning frequency
: 56 - 76 Hz
3.6 Power input
connection
Power cord length : 1.8 M
Power cord type
: 3 leads power cord with protective earth plug.
3.7 Power management
The monitor must comply with the Microsoft On Now specification, and meet EPA requirements.
Mode HSYNC VSYNC
Video Pwr-cons.
Indication
Rec.
time
Power-On On On
Active
< TBD W (typ.)
< 58 W (max.)
EPA5.0< 31.6W
White LED
--
Standby
Power Saving
Off Off
Blanked
< 0.1W (for all)
< 0.5 W (for LPY)
Blinking white LED
Period 3ec on, 3sec off
(in smile LED)
Note 1
Note 2
DC Power Off
N/A
< 0.1W (for all)
< 0.5 W (for LPY)
LED Off
AC SW Off
0W
LED Off
