81
Meridian 3
D. Economy
i.
Purpose: Adjust brightness level for reducing power consumptions
ii.
No optimization by Smart Image.
iii. Design:
1.
Brightness level set to 20, a little higher brightness level than laptop PC, fine tune brightness
level before DVT exit.
2. Color temperature set to 6500K.
3. Gamma set to 2.2.
E. Game
i.
Purpose: Design for video application, like Microsoft Media or Real Player. The screen is dominated
by video.
ii. Enhancement
Point:
1.
Dynamic contrast enhancement by histogram analysis (DLC) should be implemented.
2. Sharpness enhanced 90%.
3. Color enhancement set as the same with Video.
4. Color temperature set to user define (if higher)
5. Brightness level sets to maximum.
6. Smart Contrast set to “On”
7. Gamma set to 2.2.
F. Off
i.
Purpose: No optimization by Smart Image.
ii. Design:
1.
This will follow user OSD setting. If any change by user, it will be saved. When switch back from
other Smart Image profiles, it will go back to last saved setting.
2.
Gamma Table is turn on to reduce bad color tracking.
Demo mode
A. Purpose: Built-in demo mode for sales in-store demo.
B. Design:
i.
Dynamically split screen to 2 vertical frames with one vertical white line. The line width is 2 pixels.
The left frame will be enhanced by Smart Image Lite and right frame remains original performance.
ii.
There is OSD showing “Smart Image On / Smart Image Off” in left frame and “Original Image” if right
frame.
iii.
The OSD word color is white with transparent background.
iv.
The demo profile will be “Video Playback” profile with “High” ODC setting.
C. Hot keys to trigger:
Press [Smart Image] 3 seconds or more to trigger the demo mode.
When demo mode is On, press 3 seconds or more to turn off the demo mode.
When the demo mode is enabled, the blue LED will flash until demo mode disabled.
