!
72 Meridian 3
4.12 DDC /CI Support and Smart Manage/Control
In accordance with VESA DDC/CI and MCCS ver.2.0, the monitor should be workable with ,
Philps SmartManage, SmartControl V6.1, and Protrait Display Tune at least.
4.13
Pivot function(Auto pivot)
It needs to support AUTO PIVOT function with SmartControl PC application tool.
4.14
Hot-key definition
026'%XWWRQ
GHILQLWLRQB
4.15
Smart contrast
Smart Contrast is a kind of dynamic backlight control.
This function changes the panel backlight dynamically according to the frame brightness histogram.
At least the minimum contrast ratio has to be>
20,000,000:1 (typ.)(LED),500,000(LAMP)
4.16 Smart image
Smart Image(Premium) OSD outlook
Position
The position of the button is at the bottom center of the screen.
Smart Image Logo & Banner
As design to keep the LightFrame logo at header but change the name to “SmartImage”
with bitmap format.
Icon of each profile
Each profile will use text instead of icon & text before.
User Operation Procedure
A. 5 different modes are switched to next in the sequence from 1 to 5 then back to 1 while
pressing this button: 1) Office Work 2) Image Viewing 3) Entertainment 4) Economy 5)
Off. The default setting is ‘Off”.
B. The FOS optimization will be changed in real time by which profile to be scrolled, users
don’t need to confirm to enable.
C. The Smart Image OSD will remain on screen for 5 seconds after user last action. Or user
Summary of Contents for 220B4LPCB/00
