Philips 220B4LPCB/00, Service Manual

Page: 71 / 86

Meridian 3
71
4.5Vertical scanning
Sync polarity : Positive or Negative
Scanning frequency
: 56 - 76 Hz
4.6Power input connection
Power cord length :1.8M
Power cord type : 3 leads power cord with protective earth plug.
4.7Power management
The monitor must comply with the Microsoft On Now specification, and meet EPA requirements.
The monitor must comply with the Microsoft On Now specification, and meet EPA requirements.
Mode HSYNC VSYNC Video Pwr-cons. Indication Rec. time
Power-On On On Active
< 58W(max.)
EPA5.0<
31.6W
White LED --
Standby
power Saving
Off Off Blanked
< 0.1xW
˄
Typ
˅
0.3W (Max)
Blinking white LED
Period 3ec on, 3sec off
(In Smile LED)
Note 1
Note 2
DC Power Off N/A
< 0.1xw
LED Off
AC SW Off 0W LED Off
Note 1 : a. D-SUB mode,
Normal node to Power saving mode: 15/s (typ.) 18/s
˄
max
˅
Power saving mode to Normal: 4/s(typ.)
b. DVI mode,
Normal node to Power saving mode: 15/s(typ.) 18/s
˄
max
˅
Power saving mode to Normal: 4s(typ.)
c. DP mode,
Normal node to Power saving mode: 15/s(typ.) 18/s
˄
max
˅
Power saving mode to Normal: 4s (typ.)
Note 2 : Measurement power Saving.
̀˸˴̆̈̅˸̀˸́̇ʳ̂˹ʳ
̃̂̊˸̅ʳ̆˴̉˼́˺ˁ̃˷˹
ˣ̂̊˸̅ʳ˶̂́̆̈̀̃̇˼̂́ʳ
̀˸˴̆̈̅˸ʳ̇˻˸ʳ̊˴̌ʳˀ˃ˌ˃
4.8 VGA Display identification
In accordance with VESA Display Channel Standard Ver.1.0 and DDC 2B capability
4.9 DVI Display identification
In accordance with DVI requirement (DDWG digital Visual Interface revision 1.0)
use DDC-2B, DDC/CI, and EDID V1.3
4.10 DP Display identification
4.11 USB support
Connect the upstream port of the monitor to host PC’s USB port via USB cable. Then attach
external device to the downstream port of the monitor. Check if the device can work properly.