Philips 21PV 908, Operating Instructions Manual

Page: 25 / 31

Automatic recording from a satellite
receiver (SAT RECORDING)
You can use this function if you own a satellite receiver that
can control other machines via a scart cable and a
programming function.
a
Press
TIMER
s
on the remote control.
b
Select the line ’
TIMER PROGRAMMING
’ with the
B
or
A
button and confirm with
C
.
TIMER PROGRAMMING
VPS
DATE PROG. START END PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
-- -- --:-- --:-- - -----
ã Exit: Start:
« press TIMER press è
c
Press
C
.
TIMER PROGRAMMING
VPS
DATE PROG. START END PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx 15:36 15:50 * ONCE
ã Exit: Start:
« press TIMER press è
d
Select the entry field ’
PROG.
’ with the
D
or
C
button. Select ’
Record prepared
’ with the B or
A
button.
e
Confirm with the
OK
button.
Your TV-VIDEO Combi is now prepared for recording. The
start and end of the recording is controlled via the scart
cable.
f
To end, press the
TIMER
s
button.
g
Place a cassette in the machine.
E
If you have not connected the satellite receiver yet, use a
scart cable to connect scart socket
EXT. 1
on the
TV-VIDEO Combi to the corresponding scart socket on
the satellite receiver.
h
Programme the satellite receiver with the required
information (programme number on the SAT receiver,
start time, end time).
D
The information on how to programme your satellite
receiver can be found in the instruction manual for
your satellite receiver.
Activating a recording from the SAT
receiver with OTSR
(OTSR = One Touch Sat Recording)
In the previous paragraph we described how to prepare the
TV-VIDEO Combi for recording from the SAT receiver by
means of the menu (step
a
through
f
). OTSR will allow
you to record a SAT programme fast and easy with just one
button press.
a
Press the
Sr/q
buttons at the same time until the
timer light on your TV-VIDEO Combi starts blinking. It will
blink three times and will then stay alight.
Your TV-VIDEO Combi is now prepared for recording. The
start and end of the recording is controlled via the scart
cable.
D
Each time you programme a recording on the
satellite receiver, you must prepare your TV-VIDEO
Combi for recording. Each time you prepare your
TV-VIDEO Combi for a satellite recording a
TIMER-block will be reserved and the TIMER light at
the front will blink.
D
If the TIMER light does not blink, you have not set
the clock or all TIMER-blocks have been used up.
Please read the paragraph ’Setting the time and
date’ or ’How to clear a programmed recording
(TIMER)’.
D
If you want to cancel the programmed SAT
recording, follow the procedure described in the
paragraph ’How to clear a TIMER’.
23