Use programmed recording to automatically start and stop a
recording at a later date.
To make a programmed recording, your TV-VIDEO Combi
needs to know:
* the date you want to make the recording;
* the programme number for the TV channel you want to
record;
* the start and stop time of the recording;
* VPS/PDC on or off
* the recording speed (SP/LP).
The TV-VIDEO Combi stores all the information in a TIMER
block. You can programme up to 6 TIMER blocks a month in
advance.
’VPS’ (Video Programming System) and
’PDC’ (Programme Delivery Control)
With ’VPS’ and ’PDC’, the TV station controls the start time and
the length of the recording. This means that the TV-VIDEO
Combi switches itself on and off at the
right time
even if a TV
programme you want to record begins earlier or finishes later
than expected.
If you want to programme a time that is different from the VPS
or PDC time, you must switch off VPS or PDC.
Programming a recording
(with ’VIDEO Plus+’)
All the information required for a programming is contained in
the PlusCode programming number.
a
Press the
TIMER
s
button on the remote control.
b
Select the line ’
VIDEOPlus
’ with the
B
or
A
button and confirm with the
C
button.
c
Enter the entire PlusCode programming number (up to 9
digits) printed in your TV guide next to the start time of a
TV programme.
For example, 5-234-89 or 5 234 89
Enter 523489 for the PlusCode programming number.
If you make a mistake, you can clear your instructions
with the
CLEAR
button.
ShowView
CODE
REPEAT
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1 2 3 4 5 6
(
(
(
ONCE
0-9
Store:
press OK
d
In line ’
REPEAT
’ select the kind of programming
required with the
B
or
A
button.
’
ONCE
’
: recording only once
’
Mo-Fr
’
: recordings every day from Monday to Friday.
’
Mo-Su
’
: recordings every day from Monday to Sunday.
’
WEEKLY
’
: recordings every week on the same day of
the week.
e
Confirm with the
OK
button. Your programming details
will then appear on the TV screen.
TIMER PROGRAMMING
VPS
DATE PROG. START END
PDC
REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx
15:36 15:50
* ONCE
ã Exit:
Start:
« press TIMER
press
è
D
If VIDEO Plus+ does not recognise the TV channel,
’
P??
’ will appear on the TV screen. Instead of
’
P??
’, you can select the programme number you
want with the number buttons
0-9
.
D
If ’
Code error
’ appears on the TV screen, this
means you entered an incorrect PlusCode number
or the incorrect date. Correct your instructions or
end with the
TIMER
s
button.
D
If ’
Daily error
’ appears on the TV screen, the
date was incorrectly entered.
7.
PROGRAMMED RECORDING (TIMER)
20
