88 Meridian 2
This picture is reference only.
The official drawing will send out
by PM.
5 Audio
Selection
Stand-alone – On:
Isolate video and audio control input
Stand-alone – Off:
Integrate video and audio control
input
Mute – On: Turn off audio
Mute – Off: Turn on audio
3.4 Horizontal scanning
Sync polarity : Positive or Negative
Scanning frequency : 30 - 83 KHz
3.5 Vertical scanning
Sync polarity : Positive or Negative
Scanning frequency : 56 - 76 Hz
3.6 Power input connection
Power cord length : 1.8 M
Power cord type
: 3 leads power cord with protective earth plug.
3.7 Power management
The monitor must comply with the Microsoft On Now specification, and meet EPA requirements.
Mode HSYNC
VSYNC
Video
Pwr-cons. Indication
Rec.
time
Power-On On On Active
<24W (typ.)
< 30 W (max.) w/o audio
< 35 W (max.) w audio
EPA5.0< 24.5W
White LED
--
Standby Off Off
Blanked
0.1 W (typ.)
0.2 W (max.)
Blinking white LED
Period 3ec on, 3sec off
< 3 s
DC Power Off
N/A
0.1 W (typ.)
0.2 W (max.)
LED Off
3.8 VGA Display Identification
In accordance with VESA Display Channel Standard Ver.1.0 and DDC 2B capability
3.9 DVI Display Identification
In accordance with DVI requirement (DDWG digital Visual Interface revision 1.0) use DDC-2B, DDC/CI, and
EDID V1.3
3.10 USB Support (not required in 201B2)
Connect the upstream port of the monitor to host PC’s USB port via USB cable. Then attach external device to
the downstream port of the monitor. Check if the device can work properly.
