background image

Studio 19HFL2807D/10 

P a g e

 | 4 

 

Important informatio 

Safety 

Read and understand all instructions before you use 
your TV. If damage is caused by failure to follow the 
instructions, the warranty does not apply. 

Risk of electric shock or fire! 

 

Never expose the TV to rain or water. Never 
place liquid containers, such as vases, near the 
TV. If liquids are spilt on or into the TV, 
disconnect the TV from the power outlet 
immediately. Contact Philips Consumer Care 
to have the TV checked before use. 

 

Never place the TV, remote control or 
batteries near naked flames or other heat 
sources, including direct sunlight. To prevent 
the spread of fire, keep candles or other flames 
away from the TV, remote control and 
batteries at all times. 

 

 

Never insert objects into the ventilation slots 
or other openings on the TV. 

 

Never expose the remote control or batteries 
to rain, water or excessive heat. 

 

Avoid force coming onto power plugs. Ensure 
that the power plug is fully inserted into the 
power socket. Loose power plugs can cause 
arcing or fire. 

 

When the TV is swiveled, ensure that no strain is 
exerted on the power cord. Strain on the power 
cord can loosen connections and cause arcing. 

 

To disconnect the TV from the mains power, 
the power plug of the TV must be 
disconnected. When disconnecting the power, 
always pull the power plug, never the cord. 
Ensure that you have full access to the power 
plug, power cord and outlet socket at all times. 

Risk of damage to the TV! 

 

Two people are required to lift and carry a TV 
that weighs more than 25kg or 55lbs. 

 

When stand mounting the TV, use only the 
supplied stand. Secure the stand to the TV 
tightly. Place the TV on a flat, level surface that 
can support the combined weight of the TV 
and the stand. 

 

When wall mounting the TV, use only a wall 
mount that can support the weight of the TV. 
Secure the wall mount to a wall that can 
support the combined weight of the TV and 
wall mount. TP Vision Netherlands B.V. bears 
no responsibility for improper wall mounting 
that results in accident, injury or damage. 

 

If you need to store the TV, disassemble the 
stand from the TV. Never lie the TV on its 
back with the stand installed. 

 

Before you connect the TV to the power 
outlet, ensure that the power voltage matches 
the value printed on the back of the TV. Never 
connect the TV to the power outlet if the 
voltage is different. 

 

Parts of this product can be made of glass. 
Handle with care to avoid injury and damage. 

Risk of injury to children! 

Follow  these  precautions  to  prevent  the  TV  from 
toppling over and causing injury to children: 

 

Never place the TV on a surface covered by a 
cloth or other material that can be pulled away. 

 

Ensure that no part of the TV hangs over the 
edge of the surface. 

 

Never place the TV on tall furniture, such as a 
bookcase, without anchoring both the furniture 
and TV to the wall or a suitable support. 

 

Educate children about the dangers of climbing 
on furniture to reach the TV. 

Risk of swallowing batteries! 

 

The product/remote control may contain a 
coin type battery, which can be swallowed. 
Keep the battery out of reach of children at all 
times! 

Risk of overheating! 

 

Never install the TV in a confined space. 
Always leave a space of at least 4 inches or 10 
cm around the TV for ventilation. Ensure that 
curtains or other objects never cover the 
ventilation slots on the TV. 

Risk of injury, fire or power cord damage! 

 

Never place the TV or any objects on the 
power cord. 

 

Disconnect the TV from the power outlet and 
aerial before lightning storms. During lightning 
storms, never touch any part of the TV, power 
cord or aerial cable. 

Risk of hearing damage! 

 

Avoid using earphones or headphones at high 
volumes or for prolonged periods of time. 

Important Information 

Summary of Contents for 19HFL2807D/10


























Reviews: