Studio 19HFL2807D/10
P a g e
| 15
Setting Menu Contents
Conditional Access
Controls conditional access modules when available.
Language
Configures language settings(-may change depending on the country selected) Preferred
and current settings will be available. Current settings can be changed only if the
broadcaster supports.
Parental
Configures parental settings.
Timers
Sets timers for selected programs. / Sets sleep timer to turn off the TV after a certain
time.
Date/Time
Sets date and time.
Note:
* The TV takes the time info via the broadcast. Correct time will be available on
Date/Time Settings, if the time info is provided in the broadcast.
If the TV is in no channel mode, Date/Time settings can be changed. However, if there is
a channel preset, only “Time Settings Mode” can be changed and if this is set to Manual,
Time Zone will be enabled.
* If the TV is switched to standby mode and switched on later and there is no broadcast
available, time information will not be updated. If there is a present broadcast; however,
time information will be taken via the broadcast. In other words, time information will be
available according to these priorities: The TV first looks for the time info in the broadcast,
then to the user preference, and lastly to the teletext time information.
Sources
Enables or disables selected source options.
Install and Retune Menu Contents
Automatic Channel
Scan (Retune)
Displays automatic tuning options.
Digital Aerial:
Searches and stores aerial DVB stations.
Digital Cable:
Searches and stores cable DVB stations.
Analogue:
Searches and stores analogue stations.
Digital Aerial & Analogue:
Searches and stores aerial DVB and analogue stations.
Digital Cable & Analogue:
Searches and stores cable DVB and analogue stations.
Manual Channel
Scan
This feature can be used for direct broadcast entry.
Network Channel
Scan
Searches for the linked channels in the broadcast system..
Analogue Fine Tune
You can use this setting for fine tuning analogue channels. This feature is not available if no
analogue channels are stored.
First Time
Installation
Deletes all stored channels and settings, resets TV to factory settings and starts first time
installation. You can follow the instructions in the Initial Installation section for more
information on this process.
Clear Service List
(*) Visible for Denmark, Sweden, Norway or Finland. Clear Service List and then press
OK. The following OSD will be displayed on the screen. Select YES and press OK to
continue or select NO and press OK button to cancel.
Other Settings: Displays other setting options of the TV set:
Menu Timeout
Changes timeout duration for menu screens.
Scan Encrypted
When this setting is on, search process will locate the encrypted channels as well. If it is
set as Off, encrypted channels will not be located in automatic search or manual search.
TV Menu Features and Functions
