Philips 192E2SB2/10, Service Manual, Page: 63 / 86

ʳ
ʳ
ʳʳʳʳʳ
ʳ
ʳ
ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳ˃ˁ˄ 192E2SB2 18.5” Wide WXGA LCD Monitor
2010/08/19 PHILIPS 11 of 26
192E2SB2 LCD 63
General Product Specification
3.4 Horizontal scanning
Sync polarity : Positive or Negative
Scanning frequency
: 30 – 83 K Hz
3.5 Vertical scanning
Sync polarity : Positive or Negative
Scanning frequency
: 56 - 76 Hz
3.6 Power input connection
Power cord length : 1.8 M
Power cord type : 3 leads power cord with protective earth plug.
3.7 Power management
The monitor must comply with the Microsoft On Now specification, and meet EPA requirements.
Mode
HSYN
C
VSYNC Video Pwr-cons. Indication Rec. time
Power-On On On Active
< 25W(max.)
White LED --
Standby Off Off Blanked < 0.5W
Blinking white LED
Period 1sec on
3sec off
< 3 s
DC Power Off N/A < 0.5W LED Off
3.8 VGA Display identification
In accordance with VESA Display Channel Standard Ver.1.0 and DDC 2B capability
3.9 DVI Display identification
In accordance with DVI requirement (DDWG digital Visual Interface revision 1.0)
use DDC-2B, DDC/CI, and EDID V1.3
3.10 USB support
Connect the upstream port of the monitor to host PC’s USB port via USB cable. Then attach
external device to the downstream port of the monitor. Check if the device can work properly.
3.11 DDC /CI Support and Smart Manage/Control
In accordance with VESA DDC/CI and MCCS ver.2.0, the monitor should be workable with ,
Philps SmartManage, SmartControl V6.1, and Protrait Display Tune at least.