Philips 192E2SB2/10, Service Manual, Page: 11 / 86

192E2SB2 LCD 11
/RFN8QORFN$JLQJ)DFWRU\0RGH
To lock/unlock OSD FUNCTION(User Mode)
The OSD function can be locked by pressing"OK"button(1) for
more than 10 seconds, the screen shows following windows for 4
seconds. Every time when you press"OK" button, this message
appears on the screen automatically .
Unlock OSD function
Unlocked OSD function can be released by pressing "OK" button
for more than 10 seconds again.
$FFHVV)DFWRU\0RGH
1). Turn off monitor.
2).
[Push "EXIT" & "MENU" buttons at the same time and hold
them]+[Press "power" button until comes out "Windows screen" ]
=> then release all buttons
3).Press "MENU" button, wait until the OSD menu with Characters
"MERIDIAN 192E2 V2.1 2010-08-10” (below OSD menu) come on
the Screen of the monitor.
Factory Mode indicator
Factory Menu
Cursor can move on gray color area
Hot key function: by pressing " UP " and " DOWN " key
Simultaneously at User Mode (or Factory Mode) (PS: The Of fset R
G B function can be used on reduce or eliminate snowy noise on
the background when the resolution of video signal is
1680*1050vertical 60Hz. Slightly increase or decrease the value
until snowy noise completely disappear .
Access Aging Mode
Step 1 : Access Factory Mode then enter Factory Menu.
Step 2 : By pressing " UP" and "
DOWN " key to Burning Icon.
Press "MENU then press " UP" and " DOWN " key to turn on Aging
Mode.
Step 3 : Disconnect interface cable between Monitor and PC.
After 3 seconds, bring up:
repeatly
Connect Signal cable again=> go back to normal display