Philips 190VW9FB/00(1), Service Manual

Page: 85 / 99

HUDSON 9
85
4.6 White color adjustment
There are three factory preset white color 9300K, 6500 and sRGB Align by FGA function.
Apply full gray64 pattern, with brightness in 100 % position and the contrast control at 50 % position.
The 1931 CIE Chromaticity (color triangle) diagram (x , y) coordinate for the screen center should be:
Product specification
CIE coordinates (x,y)
9300K
x = 0.283 ± 0.015
y = 0.297 ± 0.015
6500K/sRGB
x = 0.313 ± 0.015
y = 0.329 ± 0.015
sRGB
x = 0.313 ± 0.015
y = 0.329 ± 0.015
5. Mechanical characteristics
5.1 Cosmetic - Philips ID
5.2 Mechanical data files - ProE files required
5.3 Location of Philips logo - Per Philips make-up sheet
5.4 Gap between panel and front bezel < 1.4mm (typ)
5.5 Location of Control icons - Per Philips Graphic sheet
5.6 Color for resin/paint - Per Philips make-up sheet
5.7 Resins
z RoHS required
z
WEEE required.
z
Resin type/selection refer to Project Book Section 7.2 Plastic material.
5.8 If paint is used
z RoHS required
z WEEE require
z If new painting type need to implement, refer to UN-D 1235.
5.9 Plastic mold tooling
z Tooling to be designed to minimize cosmetic defects induced by molding process (sink, blush, weld lines,
gate marks, ejector marks, etc.). Refer to “TYV61-90007”.
z
Painting to cover up cosmetic defects due to molding is strongly discouraged.
z China RoHS mark requested
5.10 Plastics flammability
z All Plastics to be Flame Retardant UL 94-HB.
z Base / Pedestal to be Flame Retardant UL 94-HB.
z All major plastic parts (bezel, back cover) need to be molded from same resin. Plastic resin type selection
should be referred to “TY R83-2-9002-1”.
http://www.wjel.net