Philips 190VW9FB/00(1), Service Manual

Page: 86 / 99

HUDSON 9 86
5.11 Texture/Glossing of housing
z The texture area and texture no should follow Philips make-up sheet.
z The exterior surfaces shall have a uniform texture.
z Philips must approve the mold texturing.
z Detail document for texture refer to “UN-D249”, “UN-D 600”.
5.12 Tilt and swivel base
z
Tilt angle : -5
°
+2/- 0
°
(forward)
+20
°
+0/-2
°
(backward)
z
Tilt for left and right:
︱ A-B ︱ ≤ 4.0MM
z Black side and cut side ：
1. Visual area
H
：｜
L-R
｜
≤ 1. 5
㎜
V ：｜ U-D ｜ ≤ 1. 5 ㎜
2.Black side on the left and right is symmetrical, not cut side.
z Gap between bezel and rear cover 0.4 mm
（
Typ.
）
z Step between bezel and rear cover
Left, right and top : ≤ 0.6mm Bottom and corner: ≤ 1.1mm
z "Wobble", "Twist", etc (front to back or side to side)
Whole monitor set shall retain stability within a short time after the applied external force disapear.
20NT , 6secs
（
typ.
）
back to stable.
5.13 Kensington Lock
z Must meet Kensington_slot.spec “TYE-M0004”.
5.14 Label
z Carton label should follow Philips requirement.
z Regulatory label follow TPV OTS.
z China RoHS label
z Detail document refer to Philips Engineering Reference Book.
A B
L R
U
D
http://www.wjel.net