4
190VW8 LCD
Data Storage
Factory preset mode:
This monitor has 15 factory-preset modes as indicated in the
following table:
Technical Data
2. Pin Assignment
2.1 PC analog video input with D - sub connector.
Connector type of analog signal cable :
D - Sub male with DDC2B pin assignment.
Blue connector with thumb-operated jackscrews.
Pin assignment :
Automatic Power Saving
If you have VESA / DPMS compliance display card or software
installed in your PC, the monitor can automatically reduce
power consumption when power saving function active. And if
an input from keyboard, mouse or other devices is detected,
the monitor will automatically wake up. The following table
shows the power consumption and signaling of this automatic
power saving feature:
This monitor must comply with the Microsoft On Now
specification, with two power management states, as defined
by the VESA DPMS document. And must appropriately display
the DPMS states. Also comply with Environmental Protection
Agency (EPA) Energy Star and TCO03 power management
standard strictly.
ENERGY STAR is a U.S. Registered mark. AS AN ENERGY
STAR PARTNER, PHILIPS HAS DETERMINED THAT THIS
PRODUCT MEETS THE ENERGY STAR GUIDELINES OF
ENERGY EFFICIENCY.
PIN
No.
SIGNAL
1
Red
2
Green/ SOG
3
Blue
4
Sense (GND)
5
Cable Detect
(GND)
Mode
HSYNC
VSYNC
Power-On
On
On
Off
Off
Off
DC Power
Off
Item H.Freq. (KHz)
Mode
Resolution
V.Freq. (Hz)
BW(MHz)
1
31.469
IBM VGA 10H
640x350
70.086
2
31.469
IBM VGA 3H
720x400
70.087
3
31.469
IBM VGA 12H
640x480
59.94
88.75
106.5
136.75