Philips 190E2FB/00 (AP) Service Manual Download Page 1

Page: 1 / 90

Description

Page

Important Safety Notice--------------------------------------2

Technical Data--------------------------------------------- 3~5

Installation-------------------------------------------------------6

On Screen Display-----------------------------------------8~9

Lock/unlock, Aging,Factory mode------------------------10

---------------------------------11

Mechanical Instructions ------------------------------12~15

Color adjustment --------------------------------------------16

Electrical instruction ----------------------------------19~20

DDC Instructions & Serial Number -----------------23~29
DDC DATA -----------------------------------------------30~31

------------------------32~33

Philips Pixel Defect Policy

F AQs (Frequently Asked Questions)--------------17~18

Firmware Upgrade for CPU-

Horizontal frequencies

30 - 8 3 k Hz

TABLE OF CONTENTS

Description

Page

-----------------------------------34

Wiring Diagram--------------------------------------------35

Block Diagram----------------------------------------------36

Power Diagram & C.B.A. ---------------------------44~47

Control Diagram & C.B.A. ---------------------------48~49

Failure Mode Of Panel

SAFETY

NOTICE

Chassis:

19 inch TFT WXGA LCD Colour Monitor

REFER TO BACK COVER FOR IMPORTANT SAFETY GUIDELINES

ANY PERSON ATTEMPTING TO SERVICE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE CHASSIS
AND BE AW ARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING ELECTRONIC
EQUIPMENT CONTAINING HIGH VOL TAGES.

CAUTION: USE A SEPARATE ISOLATION TRANSFORMER FOR THIS UNIT WHEN SERVICING.

Published by Philips Consumer Lifestyle Copyright reserved Subject to modification

JJul 19 2010

Scaler Diagram & C.B.A. ----------------------------37~43

LED Diagram & C.B.A. ---------------------------------50~51

MERIDIAN 2

Troubleshooting-----------------------------------------------7

Service Tool-----------------------------------------------21~22

190E2FB/00

312278518590

190E2FB/93
190E2FB/62

General product specification----------------------52~81
Exploded V iew ----------------------------------------------82

Spare/

arts List-----------------------83

Recommended P

PCBA photos--------------------------------------------------84

Repair tips-----------------------------------------------85~86

Repair Flow chart--------------------------------------87~89

Safety Test Requirments-----------------------------------90

190E2FB/00 (AP)

190E2FB/69
190E2FB/96

Summary of Contents for 190E2FB/00 (AP)



























































































Search results

Summary of Contents for 190E2FB/00 (AP)

Reviews:

Related manuals for 190E2FB/00 (AP)

Brands by name

Popular brands

Philips 190E2FB/00 (AP), Service Manual

Search results

Summary of Contents for 190E2FB/00 (AP)

Reviews:

Related manuals for 190E2FB/00 (AP)

Brands by name

Popular brands