Philips 170C5, Service Manual

Page: 10 / 66

10 170C5 LCD
Go to cover page
Warning Message Table
Item Attention Signals Display Time Condition Attention off
1 CANNOT DISPLAY
THIS VIDEO MODE,
CHANGE COMPUTER
DISPLAY
INPUT TO 1024X768
@ 60HZ
30 mins This warning appears when the input signal from your
computer is not in a standard video mode or is out of the
monitor’s scanning range. After 30 mins, monitor enters
sleeping mode.
No
2 NO VIDEO INPUT 30 mins This message appears when there is no signal input but with
cable while AC or DC while power on. After 30 mins, monitor
enters sleeping mode.
Yes
Show floating
menu
“ATTENTION
SIGNAL OFF”
3 CHECK CABLE
CONNECTION
30 mins This message appears when a signal cable is disconnected
while monitor is working. After 30 mins, monitor enters
sleeping mode.
Yes
Show floating
menu
“ATTENTION
SIGNAL OFF”
4 ENTERING SLEEP
MODE
3 secs This message appears when monitor is about to enter power
saving mode.
No
5 WAITING FOR
AUTOMATIC
ADJUSTMENT
till auto adjustment
finished
This message is displayed when the auto adjustment button
is pressed. It disappears when automatic adjustments are
completed.
No
6 USE 1024 X 768 FOR
BEST RESULT
On top of OSD
main menu
The message will show up at the top of the OSD main menu
in red color when the input resolution is not the 1024x768.
Yes
7 OSD MAIN CONTROLS
LOCKED
3 secs / or Till
"OSD MAIN
CONTROLS
UNLOCKED"
appear
This message will appear 3 seconds to indicate the OSD
MAIN CONTROLS status when to lock or un-lock it by
pressing “MENU(OK)” button for more than 10 seconds
while there is video input from PC. This function provides the
alternative that user can lock all the OSD main control in
case user don’t want the FOS performance setting to be
changed, for instance, during commercial exhibition.
No function when
push 10 secs (If
OSD lock then
attention off, not
any message and
only attention on)
8 OSD MAIN CONTROLS
UNLOCKED
3 secs This message will appear 3 seconds to indicate the OSD
MAIN CONTROLS status when to un-lock it by pressing
“MENU(OK)” button for more than 10 seconds while there is
video input from PC.
No function when
push 10 secs
9 ATTENTION SIGNAL
ON
3 secs This message will appear 3 seconds to indicate the attention
signals in ON or OFF status when to switch this function on
or off by pressing the AUTO button for more than 10
seconds while at no video input from PC.
Yes