Philips 160EL1SB/00 Page 91 Service Manual Download

Page: 91 / 92

ʳ
ʳ

ʳʳʳʳʳ
ʳ
ʳ

Rev :

Type :

Date :

ph il ips

Brand :

Page :

ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳ

1.0

160E1 15.6” Wide LCD Monitor

2008/12/31 PHILIPS 20 of 20

10 REGULATORY

COMPLIANCE

10.1

Worldwide

Regulatory

7<($/&'

017,QWHUQDWLRQDO

10.2 EMC Requirements

Supplier DVT EMI test result must be submitted prior to DVT samples delivery, and PVT EMI test result

must be submitted again prior to PVT samples delivery. Which also has to meet Philips' immunity testing

specification.

10.3 RoHS

Restriction on the use of certain hazardous substances.

Lead, Cadmium, Mercury, Hexavalent Chromium, Polybrominated Bipheny1 (PBB) and Polybrominated

Bipheny1 Ether (PBDE)(flame retardant).

10.4 WEEE

Producer (Philips) responsible for retailer take back schemes and recycling.

--System implemented.

--Collection and recycle targets.

10.5 Ongoing

Regulatory

There's a possibility that other regulatory certificates will be required during the life of the product. It is

the responsibility of the supplier to provide related documentation.

Summary of Contents for 160EL1SB/00





























































































Search results

Summary of Contents for 160EL1SB/00

Reviews:

Related manuals for 160EL1SB/00

Brands by name

Popular brands

Philips 160EL1SB/00, Service Manual

Search results

Summary of Contents for 160EL1SB/00

Reviews:

Related manuals for 160EL1SB/00

Brands by name

Popular brands