Philips 160EL1SB/00, Service Manual

Page: 76 / 92

ʳ
ʳ
ʳʳʳʳʳ
ʳ
ʳ
Rev :
Type :
Date :
ph il ips
Brand :
Page :
ʳ
ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳ
1.0
160E1 15.6” Wide LCD Monitor
2008/12/31 PHILIPS 5 of 20
1 FOREWORD
This specification describes a 15.6” LED LCD monitor with maximum resolution up to 1366*768
/75 Hz non-interlaced.
All optical characteristics (including WHITE-D, Brightness, and so on) are determined according
to panel specification after warming up approximate 30 minutes that brightness stability is
optimal, and follow strictly after panel specification.
2 PRODUCT PROFILE
This display monitor unit is a color display monitor enclosed in PHILIPS styling cabinet which
has an integrated tilt base.
2.1 LCD
Tier1:TPV
2.1.1 Type NR. : M156B1-L01 (C1D)
Outside dimensions : 363.8(H) x 215.9(V) x 14.3(D) mm(Typ.)
Pitch (mm) : 0.252*RGB(H)mm x 0.252(V)mm
Color pixel arrangement : RGB vertical stripes
Display surface : Hard coating (3H), Anti-glare treatment of the front polarizer
Color depth : 16.7M colors
Backlight : CCFL edge light system
Active area ( WxH ) : 344.23(H) x 193.53(V)
View angle : Horizontal 170 (Typ.), Vertical 160 (Typ.)
Contrast ratio : 500:1(typical)
White luminance : 250 nits (Typ.)
Gate IC :
Source IC :
Response time : 8ms (typ)
MTBF : 25000 Hrs
2.2 Scanning frequencies
Hor. : 30 – 60 KHz
Ver. : 56 - 76 Hz
Video dot rate : <140 MHz
Power input : 90-264 V AC, 50/60
r
2 Hz
Power consumption 6.336W typical
Functions:
(1) D-SUB analog R/G/B separate inputs, H/V sync separated, Composite (H+V) TTL level,
SOG sync
2.3 Ambient temperature: 25±2 oC
3 Electrical characteristics
3.1 Interface signals
1). D-Sub Analog
Input signal: Video, Hsync., Vsync
Video: 0.7 Vp-p, input impedance, 75 ohm @DC
Sync.: Separate sync TTL level , input impedance 2.2k ohm terminate