The programmes found will be stored into memory list. Use the SKIP menu to enable
or disable the programmes which you want it to be skipped. When you use P
UP/DOWN to access programme, all disable programmes will be skipped.
11.
RETURN TO TOP OF THE PAGE
Manual tuning
This menu allows you to store the programmes one by one by hand.
Press
to activate the menu.
1.
Use , to scroll the highlight INSTALL, and then press
.
2.
Use , to scroll the highlight SYSTEM, and then press
.
3.
Press , keys to select your tuning system:
4.
NTSC
●
PAL/M (for Brazil)
●
PAL/N (for Argentina, Paraguay, Uruguay)
●
Press
to return the install menu.
5.
Use , to scroll the highlight TUNER MODE, and then press
.
6.
Press , keys to select your tuner:
7.
Antenna: your TV is connected to an antenna to receive air programmes
●
Cable: your TV is connected to a cable network
●
Press
to return the install menu.
8.
Use , to scroll the highlight on MANUAL STORE, and then press
.
9.
If reception is unsatisfactory, use , to scroll the highlight FINE TUNE and hold
down
or
key until get good picture.
10.
Use , to scroll the highlight STORE and then press
. The message STORED
appears. The programme is stored.
11.
Repeat steps 3 to 5 for each programme to be stored.
12.
Use , to highlight EXIT and then press
to exit from the menu.
13.
RETURN TO TOP OF THE PAGE
Skipping programmes
This menu allows you to set the skipped programmes when you use p +/- keys to access the
programme.
Press
to activate the menu.
1.
Use , to scroll the highlight INSTALL, and then press
.
2.
Using other menus (NA)
file:///D|/TV/english/150mt2/osd/tv_na.htm (11 of 12) [12/24/2002 11:46:42 AM]
