Philips 107E61/00, Service Manual, Page: 18 / 85

18 107E6 CRT
Go to cover page
ISP (In System Program)
1. Click , choose Run at start menu of Windows95/98 as
shown in Fig. 13.
Fig. 13
Step 2. Run EDID46 program.
Programms
Fig. 8
1. Click , choose programs at start menu of Windows95/98 ,
find I2cHaI2c-Control Programs as shown in Fig. 8.
Step 3. Load Hex file and input the bootcode.
Fig. 9
2. Click the ''I2cHaI2c-Control Programs'',bring up the below
window as shown in Fig. 9.
Step 4. Connecting all cables and box as shown in Fig. 16.
Fig. 16
1
1=Power connector
2=D-SUB connector
PC
To
printer
port
(L
TP1)
DC Power
8-12V
Printer
Port
To
Monitor
To PC
1
2-----> ----->
To PC Video Port (D-sub)
Fig. 14
2. At the submenu, type the path of EDID46
(For example, C:\107E6\EDID46.exe, as shown in Fig. 14).
C:\107T6\edid46.exe
3. Click button. The main menu appears (as shown in Fig. 15).
OK
This is for initialize alignment box.
Fig. 15
Note: Before you connect all the cables and box, you must
execute EDID46.exe (substeps 5 to 7) firstly, otherwise, after you
connected the alignment kits, the following warning message will
appear on the screen as shown in Fig. 17.
CHECK SIGNAL CABLE
Fig. 17